Robertshaw SlimZone PREMIER ZONE CONTROL PANEL - Manual

SlimZone ®
PREMIER
ZONE CONTROL PANEL
The Robertshaw SlimZone ® Premier zone panel is
ideal for light commercial applications. It’s a constant
volume zone system that controls 3 to 19 zones
from a single heating and cooling unit. Dedicated
thermostats in combination with motorized dampers
serve each zone. The control module monitors the
zone thermostats and energizes the HVAC system
to the requested mode of operation. The SlimZone ®
Premier automatically controls equipment staging,
and all setup and monitoring is achieved by a
4-button keypad with a 4-line by 20-character
LCD display.
The basic system consists of the SlimZone ® Premier
control module which controls up to 3 zones.
Additional SlimZone ® expansion modules add 2 zones
per module and up to 8 expansion modules can be
connected to the system for a total of 19 zones.
The SlimZone ® Premier requires a DSL-520P
communicating zone thermostat for each zone. The
zone panel is wired to HVAC equipment. A dedicated
24 VAC, 75 VA transformer is needed to power the
zone panel. Separate transformers are required for
the zone dampers. The SlimZone ® Premier provides
power to the DSL-520P communicating zone
thermostat and any expander modules.
PRODUCT DESCRIPTION
• Low profile, ultra slim logic panel houses microprocessor
• Standard unit controls 3 zones
• Expandable up to 19 zones in 2-zone increments
• Compatible with electric, gas, oil or heat pump equipment
• Controls up to 3-stage heat and 2-stage cool for
heat pumps
• Controls up to 4-stage heat and 3-stage cool for
conventional equipment
• LED indicator displays all system functions with 4 lines
by 20 characters
• Constant or automatic fan runs during occupied cycle
• 45-second fan purge into last zone(s) for added comfort
• Smoke input terminals allow for connection to duct
smoke detectors
• Perimeter heat control from zone thermostats
• Solid state control module with current limiting
protection of all outputs
• 365-day per year clock
• LCD display
The Robertshaw DSL-520P zone thermostat is the exclusive
thermostat used with the SlimZone
® Premier zone control system.
These thermostats exchange data with the control panel to
optimize the zoned environment. It’s the most advanced solid
state, microprocessor temperature control device on the market
today. The DSL-520P uses an adaptive control routine based on
fuzzy logic to determine an area’s heating and cooling needs. The
routine calculates the load by evaluating recent room conditions
from the sensor within the thermostat or connected remote
sensor. It has a symbol to confirm the communication link and
temporary timed override when in an unoccupied schedule. The
thermostat comes with setpoint adjustment, zone address
confirmation buttons, dry contact relay, optional remote sensor
terminals, and perimeter heat LED indication.
SlimZone ® Premier
DSL-520P Zone
Thermostat
FEATURES AND BENEFITS