Robertshaw 9615 - Manual (Page 7)

4. Press SET.
5. Press or to change
MORN temperature.
6. Repeat Steps 2-5 for DAY, EVE, and NITE.
7. Repeat steps 2–6 above to program
any other day of the week.
8. Shift COOL-OFF-HEAT to
HEAT position.
9. Repeat steps 2-6 to program HEAT
(winter) settings.
Begin Programmed Operation
1. Place AUTO/ON
into AUTO.
2. Place COOL-OFF-HEAT
into COOL or HEAT
Depending upon the season.
3. Press PROG/MAN button
until indicator is in
PROG position.
7
>
>
PROG
MAN
SET PROG/MAN COOL-OFF-HEAT
AUX
AUTO - ON > >
SET PR
>
>
COOL-OFF-HEAT
PROG
MAN
SET PROG/MAN COOL-OFF-HEAT
AUX
AUTO - ON > >
AUTO - ON
COOL-OFF-HEAT
COOL-OFF-HEAT
SUMMER
WINTER
ET PROG/MAN C
PROG
MAN
PROG
MAN
SET PROG/MAN COOL-OFF-HEAT
AUX
AUTO - ON > >
NOTE: W HILE IN THE C OOL MODE ONCE THE THERMOSTAT TURNS THE SYSTEM OFF , A BUILT - IN DELAY KEEPS THE
COMPRESSOR FROM TURNING ON FOR ABOUT 5 MINUTES . T HIS PROTECTS THE COMPRESSOR . N O ADDITIONAL TIME
DELAY RELAY ( DELAY ON BREAK ) IS NECESSARY . T O OVERRIDE THE 5- MINUTE DELAY FOR INSTALLATION , PRESS
RESET. T HIS WILL ERASE THE DELAY AS WELL AS ALL PROGRAMMING .
110-737 3/11/04 8:15 AM Page 7