Ransburg REM Automatic Applicator 73499 - Manual (Page 10)

AA-87-02.3 7 7 7 7 7
REM Automatic Applicator - Introduction
INTRODUCTION INTRODUCTION INTRODUCTION INTRODUCTION INTRODUCTION
GENERAL DESCRIPTION GENERAL DESCRIPTION GENERAL DESCRIPTION GENERAL DESCRIPTION GENERAL DESCRIPTION
The REM REM REM REM REM ™ ™ ™ ™ ™ Automatic Applicator Automatic Applicator Automatic Applicator Automatic Applicator Automatic Applicator applies an
85 kV DC charge to the coating materials at the
point of atomization. This electrostatic charge
allows a more efficient, uniform application of
coating material to the front, edges, sides, and
back of products, making it highly suitable for
applying coatings to a variety of surface configu-
rations, large targets, small parts, tubular wares,
concave and recessed parts, etc. Because it is a
grounded fluid system, it is highly suitable for
applying a wide range of solvent reduced coatings
such as enamels, lacquers, epoxies, etc.
One of the many features of the REM System is
that the electrical discharge which is available
from the resistive charging electrode is limited to
the optimum level of safety and efficiency.
Paint consumption savings of 25% to 50% over
conventional air spray are possible with the ITW
Ransburg REM Applicator. Curved and recessed
surfaces may be uniformly finished in fewer passes
because combined air and electrostatic forces
literally follow the shape of the work surface.
Bounce losses from work are reduced by the
proper use of electrostatic attraction.
The REM Automatic Applicator System includes
the automatic applicator (with various nozzle se-
lections), low voltage cable, air and fluid hoses
and a control unit with an air and coating material
filter assemblies.
SPECIFICA SPECIFICA SPECIFICA SPECIFICA SPECIFICATIONS TIONS TIONS TIONS TIONS
Environmental / Physical Environmental / Physical Environmental / Physical Environmental / Physical Environmental / Physical
Electrical Requirements Electrical Requirements Electrical Requirements Electrical Requirements Electrical Requirements
Output V Output V Output V Output V Output Voltage: oltage: oltage: oltage: oltage: 85 kV (maximum)
Output Current: Output Current: Output Current: Output Current: Output Current: 120 Microamperes
(maximum)
Operating Operating Operating Operating Operating
Pressure:
Pressure: Pressure: Pressure: Pressure:
Fluid: 1000 psi
Air: 0-100 psi
Consumption: .5 CFM @ 30 psi
Fluid Flow Rate: Fluid Flow Rate: Fluid Flow Rate: Fluid Flow Rate: Fluid Flow Rate: Variable to 1,000 cc/min.
Hose and Cable Hose and Cable Hose and Cable Hose and Cable Hose and Cable
Lengths:
Lengths: Lengths: Lengths: Lengths: 25 ft. (Optional: 36, 50,
75, and 100 ft.)
Assembly: Assembly: Assembly: Assembly: Assembly: Multiple Fluid Nozzles
(See “Nozzle Selection
Guide” in the “Operation”
section.)
Weight: Weight: Weight: Weight: Weight: 3.2 lbs.
Length: Length: Length: Length: Length: 12-inches
Cable Length: Cable Length: Cable Length: Cable Length: Cable Length: 120 ft. maximum
ARCHIVE