Hauler Racks SERVICE BODY ‘B’ MOUNT RACKS - Manual (Page 12)

10. Drill and attach rack feet to service body.
Ensure legs and rack are square and rack is positioned correctly on the service body.
Using the marked hole positions from step 8, drill 3/8” holes in all marked locations. Using (8) 3/8-16 x 1-
1/4” hex bolts, (8) 3/8” split lock washers and (8) 3/8”-16 nuts, secure the rack to the service body.
11. Tighten all nuts and bolts
Tighten the rack attachment bolts installed in step 10 first before tightening any other rack bolts.
Proceed next to the HD brace nuts. Continue around the rack and tighten all remaining nuts and bolts
securely.
Tighten until lock washers are flat but DO NOT OVERTIGHTEN!
HAULER RACKS, INC. Toll Free: 1-800-843-5445
7109 31 st Avenue North Phone: 763-546-5620
Minneapolis, MN 55427-2848 Fax: 763-546-0933
Page 12 of 15 WWW.HAULERRACKS.COM