Hauler Racks RCB-1 - Manual (Page 3)

5 When crossbar needs to be removed:
1) Remove the 3/8”-16 wing nuts and internal tooth washers that hold the HD brace to the leg.
2) Loosen the 3/8”-16 wing nuts on the crossbar and slide the HD braces inward until they clear the bolts
in the legs.
3) Open the clasps on the locking lynch pins and remove from ‘Y’ brackets.
4) Remove crossbar from ‘Y’ brackets.
When removable inner crossbar is not going to be used, it is recommended to replace the locking lynch
pins with (2) 3/8”-16 x 2” carriage bolts, (2) 3/8” split lock washers and (2) 3/8”-16 nuts on each side for
rack rigidity. The 3/8-16 wing nuts and 3/8” internal tooth washer on the HD braces should be replaced
with 3/8” split lock washers and 3/8”-16 nuts.
HAULER RACKS, INC. Toll Free: 1-800-843-5445
7109 31 st Avenue North Phone: 763-546-5620
Minneapolis, MN 55427-2848 Fax: 763-546-0933
Page 3 of 4 WWW.HAULERRACKS.COM