Hauler Racks RCB-1 User Manual
Page 2
3. Pinning crossbar
Open the clasps on the locking lynch pins and insert the rod end through the ‘Y’ bracket. Repeat for
other side.
4. Reinstalling HD braces.
Align the HD brace on the leg and loosely secure with 3/8” internal tooth washer and 3/8”-16 wing nut.
Slide the HD brace up to the crossbar and align the bolt in the center channel.
Secure with 3/8” internal tooth washer and 3/8”-16 wing nut. Repeat for other side. Tighten all
hardware.
HAULER RACKS, INC.
Toll Free: 1-800-843-5445
7109 31
st
Avenue North Phone: 763-546-5620
Minneapolis, MN 55427-2848 Fax: 763-546-0933
Page 2 of 4 WWW.HAULERRACKS.COM