Toshiba V.92 User Manual
Page 90
90
S-Registers
AT command set result codes
5.375 x 8.375 ver 2.4.0
CONNECT 56000 EC
*
82
Connection at 56000 bps
CONNECT 28000 EC*
100
Connection at 28000 bps
CONNECT 29333 EC*
101
Connection at 29333 bps
CONNECT 30666 EC*
102
Connection at 30666 bps
CONNECT 33333 EC*
103
Connection at 33333 bps
CONNECT 34666 EC*
104
Connection at 34666 bps
CONNECT 37333 EC*
105
Connection at 37333 bps
CONNECT 38666 EC*
106
Connection at 38666 bps
CONNECT 41333 EC*
107
Connection at 41333 bps
CONNECT 42666 EC*
108
Connection at 42666 bps
CONNECT 45333 EC*
109
Connection at 45333 bps
CONNECT 46666 EC*
110
Connection at 46666 bps
CONNECT 49333 EC*
111
Connection at 49333 bps
CONNECT 50666 EC*
112
Connection at 50666 bps
CONNECT 53333 EC*
113
Connection at 53333 bps
Command Set Result Codes Table (Continued)
Result Code
Numeric
Description
* EC appears only when the Extended Result Codes
configuration option is enabled. EC is replaced by one of the
following symbols, depending upon the error control method
used:
V.44 - V.44 data compression with V.42 error control
V.42bis - V.42 error control and V.42bis data compression
V.42 - V.42 error control only
MNP 5 - MNP class 4 error control and MNP class 5 data
compression
MNP 4 - MNP class 4 error control only
NoEC - No error control protocol