Toshiba V.92 - Manual (Page 17)

17 Introduction
Function charts
5.375 x 8.375 ver 2.4.0
Function charts
The modem supports these communication protocols:
Ring indicator The computer can be powered on automati-
cally when the modem answers a call. This
feature is available only when the computer is
in Resume/Standby mode. Refer to your com-
puter’s documentation for details on ring
indicator power on.
Standby/Hiber-
nate When the computer is set to Standby or
Hibernate, the modem settings automatically
resume when you turn on the power. Refer to
your computer’s documentation for details on
Standby/Hibernate modes.
Modem On Hold Enables you to talk on the telephone while con-
nected to the Internet, using the same telephone
line. This feature requires ISP support and Call
Waiting/Caller ID Service. The phone line must
support Type 2 Caller ID (CID).
Fast Connect Shortens connection times up to 25 percent, by
storing phone line characteristics.
PCM upstream Transmits up to a maximum rate of 48,000 bits
per second upstream to host V.92 modems that
support this feature.
Functions available in all operating systems
Function Remarks
Data V.92/V.90 From 32 Kbps to 56 Kbps
V.34 From 2400 bps to 33.6 Kbps
V.32bis 4800, 7200, 9600 bps, 12, 14.4 Kbps