Toshiba V.92 - Manual (Page 37)

37 Function Check
Running diagnostics
5.375 x 8.375 ver 2.4.0
Sample Diagnostics results
If the diagnostics test fails, you may see a “Can’t Open
Port” message. This indicates that another application is
using the COM port, or the modem driver is not properly
installed.
7 If the diagnostic test fails, and this is the first time you’ve
run the test, restart the computer and repeat
step 1
through step 6 .
8 If the diagnostic test fails a second time, double-click
Control Panel on your computer’s desktop to open the
Control Panel.
9 Double-click Add/Remove Programs to open the Add/
Remove programs window.
10 Select and remove the Toshiba Software Modem.
11 If prompted to do so, restart the computer.