Toshiba V.92 - Manual (Page 88)

88 S-Registers
AT command set result codes
5.375 x 8.375 ver 2.4.0
CONNECT 9600 EC * 12 Connection at 9600 bps
CONNECT 14400 EC * 13 Connection at 14400 bps
CONNECT 19200 EC * 14 Connection at 19200 bps
CONNECT 7200 EC * 24 Connection at 7200 bps
CONNECT 12000 EC * 25 Connection at 12000 bps
CONNECT 16800 EC * 86 Connection at 16800 bps
CONNECT 300 EC * 40 Connection at 300 bps
CONNECT 21600 EC * 55 Connection at 21600 bps
CONNECT 24000 EC * 56 Connection at 24000 bps
CONNECT 26400 EC * 57 Connection at 26400 bps
CONNECT 28800 EC * 58 Connection at 28800 bps
CONNECT 31200 EC * 59 Connection at 31200 bps
CONNECT 33600 EC * 60 Connection at 33600 bps
CONNECT 38400 EC * 28 Connection at 38400 bps
(DTE rate)
Command Set Result Codes Table (Continued)
Result Code Numeric Description
* EC appears only when the Extended Result Codes
configuration option is enabled. EC is replaced by one of the
following symbols, depending upon the error control method
used:
V.44 - V.44 data compression with V.42 error control
V.42bis - V.42 error control and V.42bis data compression
V.42 - V.42 error control only
MNP 5 - MNP class 4 error control and MNP class 5 data
compression
MNP 4 - MNP class 4 error control only
NoEC - No error control protocol