Finish Thompson SP10 SERIES SELF-PRIMING - Manual (Page 15)

15
and is in lieu of any other warranties, either expressed or implied. This warranty does not apply to normal wear of the
product or components. This warranty does not apply to products or parts broken due to, in whole or in part, accident,
overload, abuse, chemical attack, tampering, or alteration. The manufacturer accepts no responsibility for product dam-
age or personal injuries sustained when the product is modified in any way. If this warranty does not apply, the purchaser
shall bear all cost for labor, material and transportation.
Manufacturer shall not be liable for incidental or consequential damages including, but not limited to process down time,
transportation costs, costs associated with replacement or substitution products, labor costs, product installation or remov-
al costs, or loss of profit. In any and all events, manufacturer’s liability shall not exceed the purchase price of the product
and/or accessories.
Ordering Spare Parts
Spare parts can be ordered from your local distributor. Consult FTI’s web site, www.finishthompson.com, to find the nearest local
distributor. Always refer to the pump model to avoid error.
BASE MODEL
COMPONENTS
ALTERNATIVE COMPONENTS Code
Bushing Graphite Carbon
PTFE T
Alumina Ceramic R
O-Ring Viton EPDM E
Connection NPT
BSP Threads B
Union U
Steel enforced flange Fs
Fiberglass enforced flange Ff
Impeller 1
2 3 4 5 6
Magnet 10-pole only
No alternatives available. A 10-pole will handle up to a
2 Hp motor.
Motor
Adapter
56C NEMA
145TC NEMA 14
IEC 63/B14 64
IEC 71/B14 74
IEC 80/B14 84
IEC 90/B14 94
IEC 63/B5 65
IEC 71/B5 75
IEC 80/B5 85
IEC 90/B5 95
Specials
SS hardware,
PTFE/ceramic thrust
rings, ceramic shaft,
Buna o-ring vapor
protection kit option
(NEMA only)
SiC bushing, thrust ring, shaft Si
Hastelloy shaft Hs
Titanium hardware Ti
Viton o-ring vapor protection kit (NEMA only) Vv
EPDM o-ring vapor protection kit (NEMA only) Ve
Non-sparking ring Ns
Motor Not Standard Select Motor Reference Number from SP Series Price Book.
3. Where standard components aren’t
suitable, add the alternative com-
ponent code letter after the base
model number to substitute
components. (See adjacent list of
alternative components.)
The model number appears on the se-
rial number label located on the motor
adapter. The model number contains a
base model that features certain standard
components. Compare the model number
on the pump to the adjacent chart to de-
termine if the pump contains any alternate
components. Model numbers containing
“P” have primary components molded
from polypropylene. Model numbers
containing “V” have primary components
molded from PVDF.
Base model numbers are: SP10P and
SP10V.
1. Select base model (e.g. SP10P)
2. If standard components are not
suitable, enter symbol(s) of
alternative components in any
order.
Base Model - - - -
SP10P E - Ff - 14
SP10P-E-Ff-14 is a SP10 poly-
propylene construction with EPDM
o-ring, fiberglass flanges and
145TC motor adapter.
Section IX - Spare Parts
Model Number Explanation