Finish Thompson DB3, 4, 5 & 5.5 Series - Manual (Page 2)

EU Declaration of Conformity
Finish Thompson Inc. hereby declares that the following machine(s) fully comply with the
applicable health and safety requirements as specified by the EC Directives listed. The product
may not be taken into service until it has been established that the drive motor for the centrifugal
pump complies with the provisions of all relevant EC Directives. The complete product complies
with the provisions of the EC Directive on machinery safety provided motors carry CE marking.
This declaration is valid provided that the devices are fully assembled and no modifications are
made to these devices.
Type of Device:
Centrifugal Pumps
Models:
AC/AK/AV - 400/500/600/800 DB-3/4/5/5.5/6/6H/7/ GP-11/22/32
8/9/10/11/15/22
KC-3/4/5/5.5/6/6H/8/10/11/22/32 MSKC MSVKC
SP-10/11/15 UC-1516/1518/326 VKC-5.5/6/6H/7/8/10
EC Directives:
Machinery Safety (2006/42/EC)
Applied Harmonized Standards:
EN ISO 12100 Part 1
EN ISO 12100 Part 2
EN 809
Manufacturer:
Finish Thompson Inc.
921 Greengarden Road
Erie, Pennsylvania 16501-1591 U.S.A
Signed,
President
April 19, 2010
Person(s) Authorized to Compile Technical File: Michael Smith Engineers Limited
Oaks Road, Woking, Surrey
GU21 6PH, UK
Telephone: 01483 771871