Fairbanks Aegis Industrial Stainless - Manual (Page 7)

D. Unpacking:
1. Check that all components are on hand, and agree with the customer's order.
2. Remove all components from their packing material, checking to make certain that
all parts are accounted for and no parts are damaged. Advise the shipper
immediately if damage has occurred. Order any parts necessary to replace those
which have been damaged. Keep the shipping container and packing material for
future use. Check the packing list.
3. Collect all necessary installation manuals for the floor scale.
4. Examine the floor scale and perform an inspection, making certain that all
hardware, electrical, and PC connections are secure.
E. Safety:
As is the case with any equipment, certain safety precautions should
be observed during operation:
1. Ensure that any structure which supports the floor scale is capable
of withstanding the weight of the scale and its rated capacity.
2. Beware of pinch points on the lift deck models. Severe personal
injury could occur if safety precautions are not observed.
3. Use proper lifting technics when raising the lift deck platforms.
F. Setup:
The setup of the floor scale consists of installing the scale on a level surface and
wiring the scale to the indicator. Consult the appropriate indicator manual for further
information regarding the indicator and its setup.
1. Select a location that is level and will fully support the weight of the platform plus a
full capacity load.
2. Remove the top of the crate and all packing/banding material.
51103 7 01/07 -- Rev. 1