Fairbanks Aegis Industrial Stainless - Manual (Page 16)

C. Foot Assembly Replacement:
1. Lift the platform end and secure using wood blocks for safety.
2. Remove the bolt which goes through the load cell and post of the foot.
3. Pull the foot assembly out of the load cell.
4. Lubricate the “O” ring on the new foot assembly and re-insert the post of the new
assembly into the load cell.
5. Align the bolt hole in the part with the bolt hole in the load cell.
6. Install the bolt and tighten.
7. Removing the safety blocks, lower the scale to the surface.
8. Ensure that the weight is shared equally by all four (4) feet.
51103 16 01/07 -- Rev. 1