E-Mon E-MM-RTU-D-N - Manual (Page 2)

2 Multi-Mon Multiple Circuit Energy Monitor
LIMITED WARRANTY
The manufacturer offers the customer a 24-month functional warranty on the instrument for
faulty workmanship or parts from date of dispatch from the distributor. In all cases, this
warranty is valid for 36 months from the date of production. This warranty is on a return to
factory basis.
This warranty is only applicable to Multi-Mon instruments using Multi-Mon current
transformers.
The manufacturer does not accept liability for any damage caused by instrument
malfunction. The manufacturer accepts no responsibility for the suitability of the instrument
to the application for which it was purchased.
Failure to install, set up or operate the instrument according to the instructions herein will
void the warranty.
Only a duly authorized representative of the manufacturer may open your instrument. The
unit should only be opened in a fully anti-static environment. Failure to do so may damage
the electronic components and will void the warranty.
The greatest care has been taken to manufacture and calibrate your instrument. However,
these instructions do not cover all possible contingencies that may arise during installation,
operation or maintenance, and all details and variations of this equipment are not covered
by these instructions.
For additional information regarding installation, operation or maintenance of this
instrument, contact the manufacturer or your local representative or distributor.
WARNING WARNING WARNING WARNING
Read the instructions in this manual before performing installation and take note of the Read the instructions in this manual before performing installation and take note of the Read the instructions in this manual before performing installation and take note of the Read the instructions in this manual before performing installation and take note of the
following precautions:
following precautions: following precautions: following precautions:
Mult Mult Mult Multiiii----Mon Mon Mon Mon is intended for measurements performed in building installations, relating to is intended for measurements performed in building installations, relating to is intended for measurements performed in building installations, relating to is intended for measurements performed in building installations, relating to
measurement category III (UL61010 measurement category III (UL61010 measurement category III (UL61010 measurement category III (UL61010----1, 6.7. 1, 6.7. 1, 6.7. 1, 6.7.4). 4). 4). 4).
Ensure that all incoming AC power Ensure that all incoming AC power Ensure that all incoming AC power Ensure that all incoming AC power and other power source and other power source and other power source and other power sources are turned OFF before s are turned OFF before s are turned OFF before s are turned OFF before
performing any work on the instrument. Failure to do so may result in serious or even performing any work on the instrument. Failure to do so may result in serious or even performing any work on the instrument. Failure to do so may result in serious or even performing any work on the instrument. Failure to do so may result in serious or even
fatal injury and/or equipment damage.
fatal injury and/or equipment damage. fatal injury and/or equipment damage. fatal injury and/or equipment damage.
Before Before Before Before connectin connectin connectin connecting the instrument to the power g the instrument to the power g the instrument to the power g the instrument to the power source source source source, check the labels at the front of , check the labels at the front of , check the labels at the front of , check the labels at the front of
the instrument to ensure that your instrument is equipped with the appropriate rating the instrument to ensure that your instrument is equipped with the appropriate rating the instrument to ensure that your instrument is equipped with the appropriate rating the instrument to ensure that your instrument is equipped with the appropriate rating
input voltages and currents.
input voltages and currents. input voltages and currents. input voltages and currents.
Under Under Under Under no circumstances should the instr no circumstances should the instr no circumstances should the instr no circumstances should the instrument be connected to ument be connected to ument be connected to ument be connected to a power a power a power a power source source source source
if it is damaged. if it is damaged. if it is damaged. if it is damaged.
To prevent To prevent To prevent To prevent potential fire or shock hazard, do not expose the potential fire or shock hazard, do not expose the potential fire or shock hazard, do not expose the potential fire or shock hazard, do not expose the instrument to instrument to instrument to instrument to rain or rain or rain or rain or
moisture. moisture. moisture. moisture.
While installing While installing While installing While installing Multi Multi Multi Multi----Mon CTs Mon CTs Mon CTs Mon CTs to the to the to the to the secondary secondary secondary secondary of an external of an external of an external of an external third party third party third party third party cu cu cu current rrent rrent rrent
transformer transformer transformer transformer, the external current transformer secondary output , the external current transformer secondary output , the external current transformer secondary output , the external current transformer secondary output must never be must never be must never be must never be allowed allowed allowed allowed
to to to to be be be be open circuit when the primary is energized. An open circuit can cause high open circuit when the primary is energized. An open circuit can cause high open circuit when the primary is energized. An open circuit can cause high open circuit when the primary is energized. An open circuit can cause high
voltages, possibly resulting in equipment damage, fire and even voltages, possibly resulting in equipment damage, fire and even voltages, possibly resulting in equipment damage, fire and even voltages, possibly resulting in equipment damage, fire and even serious or fatal inj serious or fatal inj serious or fatal inj serious or fatal injury ury ury ury. . . .
Ensure that the current transformer wiring is secured using an external strain relief to Ensure that the current transformer wiring is secured using an external strain relief to Ensure that the current transformer wiring is secured using an external strain relief to Ensure that the current transformer wiring is secured using an external strain relief to
reduce mechanical strain on the screw terminals
reduce mechanical strain on the screw terminals reduce mechanical strain on the screw terminals reduce mechanical strain on the screw terminals, if necessary. , if necessary. , if necessary. , if necessary.
Only qualified personnel familiar with the instrument and its associated electrical Only qualified personnel familiar with the instrument and its associated electrical Only qualified personnel familiar with the instrument and its associated electrical Only qualified personnel familiar with the instrument and its associated electrical
equipment must perform setup procedures
equipment must perform setup procedures equipment must perform setup procedures equipment must perform setup procedures.
Do not open the instrument under any circumstances when it is Do not open the instrument under any circumstances when it is Do not open the instrument under any circumstances when it is Do not open the instrument under any circumstances when it is connected to a connected to a connected to a connected to a
power power power power source source source source....
Do not use the instrument for primary protection functions where failure of the device Do not use the instrument for primary protection functions where failure of the device Do not use the instrument for primary protection functions where failure of the device Do not use the instrument for primary protection functions where failure of the device
can c
can c can c can cause fire, injury or death. The instrument can only be used for secondary ause fire, injury or death. The instrument can only be used for secondary ause fire, injury or death. The instrument can only be used for secondary ause fire, injury or death. The instrument can only be used for secondary
protection if needed. protection if needed. protection if needed. protection if needed.
Read this manual thoroughly before connecting the device to the current carrying circuits. Read this manual thoroughly before connecting the device to the current carrying circuits. Read this manual thoroughly before connecting the device to the current carrying circuits. Read this manual thoroughly before connecting the device to the current carrying circuits.
During operation of the device, hazardous voltages are present on in
During operation of the device, hazardous voltages are present on in During operation of the device, hazardous voltages are present on in During operation of the device, hazardous voltages are present on input terminals put terminals put terminals put terminals. Failure . Failure . Failure . Failure
to observe precautions can result in serious or even fatal injury or damage to equipment. to observe precautions can result in serious or even fatal injury or damage to equipment. to observe precautions can result in serious or even fatal injury or damage to equipment. to observe precautions can result in serious or even fatal injury or damage to equipment.
All trademarks are property of their respective owners.
August 2013