Electronics International MVP-50T - Manual (Page 39)

39
6.2 System Configuration Screens Overview:
The System Configuration Screens provide access to setup
and calibration data. By accessing this data you can
properly set up the MVP to work with your aircraft. It is
important you understand the operation of each screen and
function before you change any data. If you do not have
the knowledge to properly change an item, seek help. All
changes must be verified that they provide proper MVP
operation.
WARNING: The System Configuration Screens
allow you to change important setup and calibration
data that may affect the way the aircraft is operated.
If any data is changed in any one of the System
Configuration Screens, it is important to verify that
the change is proper for your aircraft. If any changes
have been made, back up the MVP configuration files
to the USB Data Stick.
You must set a unique password to protect all of the calibration and setup data in the MVP. If setup or
calibration data is inadvertently or improperly changed, the MVP could display inaccurate readings that
may lead to improper operation of the aircraft or engine. This could result in engine damage and/or an
emergency situation. Verify that the MVP is working properly for the aircraft and engine for which it is
intended BEFORE the aircraft is released for normal operation.
IOnce you have entered the correct password you will not be asked for it again until power to the MVP has been
cycled. The factory default password is “0100” for experimental units.
The following describes the operation for each System Configuration Screen.
6.3 “USB Flight Data File Manager” Screen:
“Read Files From USB Data Stick” Section:
This section allows you to read Checklists, Flight Plans, General Information and Voice files from the
USB Data Stick. All of the files must have a “.txt” extension and they must be located in the following
directories on the USB Data Stick:
Checklists ------- “checklists” directory.
Flight Plans ----- “flight_plans” directory.
General Info ---- “general_info” directory.
Voice Files ------ “audio” directory.
The Splash Screen is provided by E.I.