PROLiNK PHC105 User Manual - Manual (Page 18)

PROLiNK® PHC-105 User’s Manual www.prolink2u.com
Version 1.00 13 English
4.9 Arming or Disarming The Camera
 When the camera is arming, the built-in infrared body detector is in work status. The camera will
automatically send alarm message by preset way once it is triggered.
 When the indicator light on the camera slowly flashes green, it shows that the camera is disarmed.
SMS Command [17 & 18] – Arming/Disarming the camera
User must send the following SMS Command to device via mobile phone.
PSWD arm
PSWD DISARM
 PSWD is a four digit number password. The original password is 1234.
 ARM is to arm the camera.
 DISARM is to disarm the camera.
 For example：1234 ARM
4.10 Check Status
4.10.1 Check memory card by computer
Connect the camera with computer via USB cable; make sure the camera is in turn-on status. Computer will
recognize the removable disk; there is one media file when you open the removable disk. Under the media file,
there are many sub files named by recording time, including video and images.
4.10.2 Check working camera status by mobile phone
SMS Command [19] – Check the preset setting and work status of the camera
User must send the following SMS Command to device via mobile phone.
PSWD status
 The replying contents will be shown as actual status:
o Smart sensor Status [[DD/MM/yyyyhh:mm:ss]
o 3G:y [where y=0-5 = 3G reception 0= none, 1=poor-5 best]
o 2G:y [where y=0-5= 2G reception 0= none, 1=poor-5 best]
o [Armed/Disarmed]
o Ext power on/ Ext power off
o Battery:[yy]%
o Call number:[ 123456789/not set]
o Call on alarm:[on/off]
o
SMS on alarm:[on/off]