3 e-mail settings, E-mail settings – PROLiNK PHC105 User Manual User Manual
Page 13

PROLiNK® PHC-105 User’s Manual
www.prolink2u.com
Version 1.00
8
English
AUTHOR TYPE: Authentication type for a PDP context
0---No authentication
1---PAP authentication
2---CHAP authentication
USERNAME can be empty.
PASSWORD can be empty.
All parameters need to have comma in between, if comma is forgotten to add, the camera will remind reset the
parameters.
Please contact product supplier if other data account is needed.
4.3
E-Mail Settings
Note
1. This setting is necessary only if the user want to see image by E-mail.
2. This function should be supported by the local network provider. Please contact your local network provider for the details concerning
this function.
SMS Command [7] – Add/modify an Email address for receiving image
User must send the following SMS Command to device via mobile phone.
PSWD email address Email
PSWD is a four digit number password. The original password is 1234.
EMAIL should be the E-mail address which the user appointed to receive image.
Only one E-mail address can be set as receiving address.
If the user wishes receiving image by an appointed E-mail address when needed,
see 4.4.2
send image to E-
mail address.
If the user wishes the camera sending the alarm image to appointed E-mail address,
see 5.1.10
MMS
notification to pre-set E-mail address.
For example: 1234 EMAIL ADDRESS [email protected]
SMS Command [8] – Add/modify an Email address for sending image
User must send the following SMS Command to device via mobile phone.
PSWD email param AccountName, AccountAddress, UserName, Password, ReceiveServer, SendServer,
ReceivePort, SendPort, DataAccountID
PSWD is a four digit number password. The original password is 1234.
ACCOUNTNAME, ACCOUNTADDRESS, USERNAME, PASSWORD, RECEIVESERVER, SENDSERVER,
RECEIVEPORT, SENDPORT, DATAACCOUNTID should be the E-mail parameters which offered by network
server.
All parameters need to have a comma in between; parameters should be set completely so that the images can
be received.
For example: 1234 EMAIL ADDRESS [email protected]