PROLiNK PHC105 User Manual - Manual (Page 17)

PROLiNK® PHC-105 User’s Manual www.prolink2u.com
Version 1.00 12 English
4.7 Infrared Body Detector
When the camera is working under arming mode, if someone approaches to the detecting area, the built-in
infrared body detector will trigger the camera alarm as preset ways
SMS Command [13 & 14] – Activate/Deactivate infrared body detector
User must send the following SMS Command to device via mobile phone.
PSWD ir alarm on
PSWD ir alarm off
 PSWD is a four digit number password. The original password is 1234.
 IR ALARM ON is to activate the body detector
 IR ALARM OFF is to deactivate the body detector
 For example: 1234 ir ALARM ON
 Infrared body detector is activated as default.
Note
When the camera is operating on low battery, it’ll send SMS message to notify “low voltage”. The infrared body detector will
be deactivated and the configure setting cannot be saved.
4.8 Motion Detection
 The motion detection feature is based on image frame compare technology. The firmware will compare
front and after images which capture from camera and therefore detect motion.
 The motion detection feature only functions when the camera is armed and motion detection is activated.
SMS Command [15 & 16] – Activate/Deactivate motion detection
User must send the following SMS Command to device via mobile phone.
PSWD motion off
PSWD motion on
 PSWD is a four digit number password. The original password is 1234.
 MOTION ON is to activate the motion detection
 MOTION OFF is to deactivate the motion detection
 For example：1234 MOTION ON
 Motion detection is deactivated as default.
Note
1. If the camera faces an object that moves constantly, such as a tree shaking in the wind, it will send alarm message
constantly. Recommend to use the camera in a still place.
2. Low battery: The motion detection function will be deactivated and the configure setting cannot be saved when the
camera is operating in low battery.