PROLiNK PPL1201 User Manual - Manual (Page 6)

PROLiNK PPL1201 User Manual www.prolink2u.com
Version 1.00 Page 1 of 25 PPL1201
Section 1 : Introduction
Congratulations on your purchase of this outstanding PROLiNK® PPL1201 Powerline AV Ethernet Adapter. This
device is a 200Mbps Powerline AV Ethernet Adapter which transforms your house’s existing electrical wiring into an
ubiquitous networking infrastructure. Simply plug this PROLiNK® PPL1201 Powerline AV Ethernet Adapter into an
ordinary AC power outlet which will easily extend your Cable/xDSL broadband connection or existing Ethernet (LAN)
network to any other electrical outlet in any room of a house without the need of any new cabling.
PROLiNK® PPL1201 Powerline AV Ethernet Adapter supports up to 200Mbps data rate over the existing household
power circuit. With data rates of 200Mbps, full multimedia application can easily be supported throughout the
whole house in addition to Internet access. This PROLiNK® PPL1201 Powerline AV Ethernet Adapter uses the
existing power lines installed in a home as a path to transmit digital data, voice, audio and video between devices.
To ensure data communication’s security and multimedia applications, the PROLiNK® PPL1201 Powerline AV
Ethernet Adapter support built-in 128-bit AES encryption and Quality of Service (QoS) features.
With minimum setup, you can install and use this PROLiNK® PPL1201 Powerline AV Ethernet Adapter within
minutes. The adaptor adds two new functions to be useful:
1. Push button support
a. Enhance simple connect set-up
b. Enhance pairing feature includes chaining
c. Restore the device configuration to factory default.
2. Green Low Power operation mode
When PC or other Ethernet devices are completely power off, PROLiNK® PPL1201 Powerline AV Ethernet
Adapter will automatically enter power saving mode which will help to reduce power consumption by at
least 60%.
• Device goes into Standby when there is no Ethernet link
• Any device in the network can enter Standby
Section 1 Section 1