PROLiNK PPL1201 User Manual - Manual (Page 19)

PROLiNK PPL1201 User Manual www.prolink2u.com
Version 1.00 Page 14 of 25 PPL1201
4.1.1 Rename
This Management Utility allows you to change the name of the listed PROLiNK® PPL1201 Powerline AV
Ethernet Adapter. Click and select the PROLiNK® PPL1201 Powerline AV Ethernet Adapter you wish to
change from the list, then click on the “Rename” tab and editing-in-place to change the name.
4.1.2 Enter Password
To set or change your PROLiNK® PPL1201 Powerline AV Ethernet Adapter’s password, click and select the
PROLiNK® PPL1201 Powerline AV Ethernet Adapter you wish to change from the list, then click on the
“Enter Password” tab, the following screen display.
Enter your Password (Take note to the password format) and click “OK” after setup.
Note:
The PROLiNK® PPL1201 Powerline AV Ethernet Adapter
device must be present on the power line (plugged in) in
order for the password to be confirmed and added to the
network. If the PROLiNK® PPL1201 Powerline AV Ethernet
Adapter device could not be located, a warning message will
be shown.
Note:
The Password field accepts the Device password in any case
formats, with or without dashed between them.
Section 4 Section 4