Asante Technologies IC3624PWR - Manual (Page 69)

69
IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit
6.3.10.1 PoE Port Configuration
Power over Ethernet provides power to connected IEEE 802.3af-compliant powered devices from all 10/100 Ethernet
ports if the switch detects that there is no power on the circuit. Use this screen to configure individual ports.
Map: Main Menu->Advanced Switch Configuration->Power Over Ethernet->PoE Port Configuration
Two functions provides for the PoE control.
•
Port Configuration
•
Global Configuration
6.3.10.1 PoE Port Configuration
Admin.
Status: The status of administration for a port
Priority: The priority of a PoE port. Three selections are available, critical, high and low. When the power
consumption over the power budget, the critical has higher priority on power supplying.
Limit(mW): The maximum power supplied to a port. The default is 15.4W or 15000mW