Asante Technologies IC3624PWR - Manual (Page 63)

63
IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit
6.3.5.7 Policy
Use this submenu to create, delete, enable or disable, show status or sequence and update the policies for the
different ports. A policy may associated with classifier, in-profile, no-match, out-profile, port list, and sequence.
Classifier and port list are necessary for a policy.
Map: Main Menu->Advanced Switch Configuration->Access Control->Policy
Six options are available in this page:
•
Create Policy
•
Delete Policy
•
Enable or Disable Policy
•
Show Policy Entry
•
Update Policy
•
Display Sequence By Port
6.3.6 Quality of Service Configuration
The priority tag of each packet is divided into four queues on each output port. The default is each queue takes two
priorities sequentially. The Administrator may configure the traffic class. The Quality of Service (QoS) only works after
the QoS status is enabled. Use the Set QoS Status options to enable this feature.
Map: Main Menu->Advanced Switch Configuration->Quality of Service Configuration
There are two features your can configure from this menu.
•
Mapping Method
•
Scheduling Method
6.3.6.1 Mapping Method
Use this submenu to set the traffic class mapping method.
Map: Main Menu->Advanced Switch Configuration->Quality of Service Configuration->Mapping
Method
The following three functions are available from this screen.
•
QoS Status
•
Traffic Class Mapping
•
Scheduling Method Configuration