Bosch Kompakt-Dampfgenerator Sensixx´x DI90 AntiShine TDI902836A magic night blue weiß - Manual (Page 23)

23
BOSCH
ENG
lISH
Trouble shooting
problem probable cause Solution
The iron does not
heat up.
1. Temperature control (15) set to
minimum.
2. No mains supply.
3. The “SensorSteam” system has been
activated. The iron is set to stand-by.
1. Turn to a higher position.
2. Check with another appliance or
plug the iron into a different socket.
3. Grip the handle (1) of the iron to
re-start it.
“SensorSteam”
indicator lamp (3)
flashes.
• The “SensorSteam” system has been
activated. The iron is set to stand-by.
• Grip the handle (1) of the iron to
re-start it.
The lights inside
the temperature
control (15) flash.
• The soleplate is heating up or cooling
down to the selected temperature.
• This is normal and lights will stop
flashing when the selected
temperature is reached.
When the temperature selection is
changed from a higher to a lower
setting, the time needed is longer.
To speed up the cooling process,
you may press the shot of steam
button (6).
The clothes tend
to stick.
• The temperature is too high. • Turn the temperature control (15)
down and wait until the iron has
cooled down.
advice on disposal
ℹ ℹ
Our goods come in optimised packaging.
This basically consists in using non-
contaminating materials which should be
handed over to the local waste disposal
service as secondary raw materials. Your
local town council can give you information
about how to dispose of obsolete
appliances.
This appliance is labelled in
accordance with European Directive
2012/19/EU concerning used
electrical and electronic appliances
(waste electrical and electronic
equipment -WEEE).
The guideline determines the framework for
the return and recycling of used appliances
as applicable throughout the EU.