PASCO SE-9076 Constant Velocity Tubes - Manual (Page 7)

3
Constant Velocity Tubes 012–06697B
MSDS: CITGO A/W Hydraulic Oil 46
To request a complete material safety data sheet (MSDS) you may either use the following contact information, or
request a copy directly from PASCO.
COMPANY IDENTIFICATION EMERGENCY TELEPHONE NUMBERS
CITGO Petroleum Corporation Technical Contact: (918) 495-5933
P.O. Box 3758 Medical Emergency: (918) 495-4700
Tulsa, Oklahoma 74102 CHEMTREC Emergency: (800) 424-9300
ACUTE EXPOSURE SYMPTOMS
CITGO A/W Hydraulic Oil 46 is generally of a low order of toxicity.
EYE:
This material may cause transient eye irritation.
SKIN:
This material may cause transient skin irritation.
INGESTION:
If swallowed, there is slight risk of aspiration to the lungs. Upon ingestion, gastrointestinal discomfort, diarrhea, and
headache may occur.
INHALATION:
In enclosed spaces or when hot, vapors may reach concentrations sufficient to cause drowsiness, dizziness, headaches,
nausea, or lung irritation. Elevated mist concentration well above applicable workplace exposure levels may cause
severe lung damage.
FIRST AID MEASURES
EYE:
Flush eyes with large volumes of fresh water. Seek medical attention if pain, excessive tearing or irritation persists.
SKIN:
Wash exposed skin with soap and water. Remove contaminated clothing. Launder before use. Seek medical attention
if tissue damage occurs or if irritation persists.
INGESTION:
Induce vomiting ONLY upon the advice of a physician. Seek medical attention immediately.
INHALATION:
Move victim to fresh air. If victim is not breathing, immediately begin cardiopulmonary resuscitation (CPR). If
breathing is difficult, 100 percent humidified oxygen should be given by a qualified individual. Seek medical attention
immediately.