PASCO SE-7183 Spectrometer - Manual (Page 5)

3
B UILDING A PAGE
4. Select the Graph button.
The preview section should now indicate a single graph.
5. Select OK.
A new SPARKlab page appears displaying a graph. The first measurement you
selected will be plotted on the y-axis, and Wavelength will be plotted on the x-
axis. Colors corresponding to the visible spectrum appear on the background of
the graph.
Building a time acquisition page
1. Select the Build button (if you are viewing the Home screen) or select
the New Page button (if you are viewing and existing SPARKlab page)
to open the Page-build screen.
Build button
New Page button
2. In the Page-build screen, select one of the following measurements:
• Intensity
• Minus Dark
• Absorbance
• Transmission
• Rel. Irradiance
See “About the measurements” below for information about each
measurement.
The selected measurement is highlighted in orange.
3. Select the Graph button.
The preview section should now indicate a single graph.
4. Select OK.
A new page appears with a graph. The measurement you selected will be plotted
on the y-axis, and Time will be plotted on the x-axis.