Nova-Tech GC Indicator - Manual (Page 37)

P a g e 35 © Adam Equipment Company 2010
12.2.11 F11 –ZERO TRACK SETTING
• This parameter allows the amount of zero track correction. To enter
this parameter, press the [Tare] key when “F11” is shown.
• The display will show the current setting, i.e. “ 0.5d “ resenting one-half
a division. Other possible settings are 1d, 2d, 4d and Off.
• Press the [U.Wt./Units] key to change the value. Press [Tare] to accept
the displayed value.
• Press [Zero] to return to weighing.