Diamond Products SB - Manual (Page 13)

SB Wire Sawing System Technical data
SB_0107_e.mif Page 13
:LUH OHQJWKV
The forward feed movement takes place with
the drawing in of the wire into the machine. For
this purpose the rocker with the driving pulleys
is swivelled upwards. The wire lengths, which
are thereby drawn into the machine are shown
in the "Wire lengths" table.
:LUH OHQJWKV
6WRUDJH
5RFNHU
DW
ERWWRP
'UDZLQ /
(Rocker in top position)
7RWDO OHQJWK
L1 Without storage 5.50 m 2.00 m (L1 + L2) = 7.50 m
L1 + Storage A 7.50 m + 2.00 m = 4.00 m (L1 + L2) = 9.50 m
L1 + Storage B 9.50 m + 2.00 m = 6.00 m (L1 + L2) = 11.50 m
L1 + Storage C 11.50 m + 2.00 m = 8.00 m (= L1 + L2) = 13.50 m
L1
+ Storage D 13.50 m + 2.00 m =
P
(= L1 + L2) =
P