Detroit Radiant Products Company FA Series - Manual (Page 20)

20
FA Series
Figure 3.3 • Field Wiring
Connect wires together with UL approved wire connectors.
Green to Ground
Black to L1
White to L2
Note: A UL Listed switch may be installed in the 2x4 junction box for use as a service disconnect.
L1
Ground
L2
Black to L1
(Hot)
White to L2
(Neutral)
Green
(Ground)
Junction Box
Flexible Conduit
BX or Romex Connector
Route the field supplied power wires so that they do not come in contact with the flue wrapper or
venter housing. These hot surfaces may damage the wire’s insulation, resulting in damage to the
unit.
CAUTION
!
3.0 Installation • Field Wiring