Multichannel Systems STG4004+STG4008 Manual - Manual (Page 19)

Operating the STG
15
4.2.1 Operating the USB-MEA32-STIM4-System
The USB-MEA32-STIM4-System has an integrated four channel current stimulus generator.
For operating this kind of STG, please select the device in Select Device dialog via serial number.
To select stimulation channels, open the dialog Select Stimulation Channels in Edit menu.
Select Layout: 1 x 12.
It is possible to assign stimulation channel 1 and 2 to stimulation electrodes S1 to S6. It is not
possible to select the same electrode for both channels. Stimulation electrodes S7 to S12 have
to be assigned to channel 3 and 4. If you do not need four channels for stimulation, click check
box "channel off".
For programming the stimulation channels, please use MC_Stimulus II as usual.