Multichannel Systems STG4002 Manual - Manual (Page 56)

Stimulus Generator 4002 Manual
52
9.3 Toolbar
For your convenience, you will find some of the more commonly used commands as a button
on the toolbar.
New File Creates a new MC_Stimulus II file (*.stm) file.
Open File Opens a previously saved MC_Stimulus II file (*.stm) file.
Save File Saves a MC_Stimulus II *.stm file to the chosen destination.
Cut Row Deletes selected row(s) and sends deleted row(s) to clipboard.
Copy Row Sends selected row(s) to clipboard.
Paste Row Pastes row(s) from clipboard and overwrites row(s) starting
at the selected row.
Print Prints active channel of active worksheet.
Information Opens the About dialog, where you can find information about
the hardware, software, and firmware versions.
Download Downloads stimulation file to the connected STG (only available
if the STG has active computer connection).
Download and
Start Downloads and starts stimulation file to the connected STG
(only available if the STG has active computer connection).
Start Starts downloaded stimulation file (only available if the STG
has active computer connection).
Stop Stops downloaded stimulation file (only available if the STG
has active computer connection).