Multichannel Systems STG4002 Manual - Manual (Page 16)

Stimulus Generator 4002 Manual
12
4.2
Operating Multiple STGs
If you have more than one STG connected to the same computer, please click under "STG"
in main menu "Select Device". In the "Select Device" dialog you can choose which STG
you like to control from the currently active MC_Stimulus II program.
 The serial number is printed on the STG's case. The serial number of the currently active STG
is displayed on the status bar of the currently active instance of the MC_Stimulus II program.
 Click Select Device under STG in main menu. Select the serial number of the desired STG from
the STG list.
 You can open multiple instances of the MC_Stimulus II program and control multiple STGs at
the same time. Please make sure that you control each STG only by one MC_Stimulus II instance.
 You can also open only one MC_Stimulus II instance and control multiple STGs one after the
other by the same instance. Simply change the settings in the Select Device dialog and select
the next STG when you have finished to program the first. The STGs can be operated without
a computer connection.