Micromod Micro-DCI: 53SU6000 COMMUNICATIONS SERVICES - Manual (Page 34)

53SU6000 INSTALLATION AND SETUP GUIDE
26 Introduction
4.3 INTERFACING WITH THE Micro-PWC GLOBAL DBA
The UdciGDS.ini file (located in the Windows root directory) allows several parameters of the
Micro-PWC Global DBA system to be customized:
[Events]
AREA This parameter should be set to the area in which all Micro-DCI
events will be reported. This value is ignored if an area as described
in Section 4.0 is assigned.
Values range from 1 to 255.
PRIORITY This parameter should be set to the priority level at which all Micro-
DCI events will be reported. This value is ignored if a priority as
described in Section 4.0 is assigned.
Values range from 1 to 16.
[Timing]
ATOMSTALESEC The Micro-PWC system’s Micro-DCI instrument interface provides
values to the various Micro-PWC system displays. This parameter
establishes an upper limit as to how old trend data values may be.
Setting this parameter to low time values produces fresher data but
increases the time required to call up a display for the first time.
Settings are in seconds. Values range from 1 to 65535 seconds.
BKGDDELAYMSEC This parameter is set by the factory and should not be changed.