Micromod Micro-DCI: 53SU6000 COMMUNICATIONS SERVICES - Manual (Page 16)

53SU6000 INSTALLATION AND SETUP GUIDE
8 Introduction
3.3 Determine I/O Address for Supervisor Board
Part of the 53SU6000 installation procedure includes determining which I/O addresses have already been
assigned to other devices and functions and what I/O addresses are available. This information will be
necessary for installing a Supervisor Board. When installing a Supervisor Board, the I/O address on this
card must be set before it is installed. For this reason, you need to know what I/O addresses are available
when you are installing this board.
Follow the steps below to determine available I/O addresses.
3.3.1 Windows 2000 Professional
Locate the icon labeled My Computer on the Windows Desktop. With the mouse, right-click on this icon.
The screen should appear as shown in
Figure 3-3 .
Select the Manage menu item as shown in Figure 3-3 .
From the Computer Management\System Tools\System Information \Hardware Resources
path, click I/O. The first set of four digits in the Address Range column, as shown in fig, contains the phys-
ical I/O addresses that have already been assigned to another function. Find an unused I/O address for
Figure 3-3. Selecting the Manage Menu Item