Micromod Micro-DCI: 53SU6000 COMMUNICATIONS SERVICES - Manual (Page 17)

53SU6000 INSTALLATION AND SETUP GUIDE
Introduction 9
each Supervisor Board in the system. Valid Supervisor Board I/O addresses are: 0x280, 0x290, 0x300,
0x310, 0x380, 0x390 and 0x3A0.
3.3.2 Windows XP Professional
• Open the Help and Support Center dialog by clicking on the Start button, then selecting Help
and Support from the menu.
• Click Support on the Help and Support Center toolbar.
• Click Advanced Information on the left side of the window.
• Click View Detailed System Information on the right side of the window.
• From the System Summary\Hardware Resources path, click I/O. The first set of four
digits in the Address Range column, as shown in
Figure 3-5 , contains the physical I/O
addresses that have already been assigned to another function. Find an unused I/O address
for each Supervisor Board in the system. Valid Supervisor Board I/O addresses are: 0x280,
Figure 3-4. Computer Management Window