Meriam M203 Altimeter Indicated Air Speed Tester User Manual

Page 31

Service and Calibration

If the M203 can not be zeroed, recalibrated or is damaged, it must be

returned to the factory for servicing. In this case, contact the Meriam

Process Technologies representative in your area or call the factory at the

numbers listed below for a Return Material Authorization (RMA) number.

DO NOT send any unit in for service without first contacting Meriam for
a Return Material Authorization (RMA) number. If this number has not
been obtained and clearly marked on the return packaging, the unit
will be returned at the shipper’s expense.

An RMA number will be

provided by the Meriam Repair Department when you call, fax or e-

mail your information. Certification for Non-Hazardous Materials will

also be required. The RMA number must accompany all incoming

packages to insure proper tracking, processing and repair work.

To assist us in processing your service request, please have the Model &

Serial Number of the unit available when you call. This information is

located on the product label label.

Meriam Process Technologies

10920 Madison Ave. Cleveland,

H 44102

Ph. (216) 281-1100

FAX (216) 281-0228

E-mail: [email protected] Web: