Mallory Ignition ACCEL POWER PROCESSOR 79100 - Manual (Page 7)

Power Processor
7
Power Processor Quick Menu Flow Chart Gasoline View
Programin ECU
Once you are done selecting the options, press cancel, then select program ECU.
Follow directions and do not disturb the Processor or turn key off.
Some vehicle are not equipped with certain functions or parameters that the PCM controls,
they will not come up on the Proccesors screen)
RPM limits vary form vehicle to vehicle.
1) Turn Key On To Check Vehicle ID
Turn Key Off Press OK
Track Control
WOT Air/Fuel
REV Limit Drive
REV Limit Neutral
Select Vehicle
Street 87 Octane
2500 - 7500 RPM
5100 - 8000 RPM
Power Program Return To Stock
MAX Performance 93 Octane
Performance 91 Octane
Axle Ratio 2.73 - 3.08 - 3.27 - 3.55 - 3.73 - 3.90 - 4.10 - 4.30 - 4.56
High Speed Limiter 60 To 125 MPH
Idle Speed Drive
Low Fan 170 - 230
Spark Timing
Tire REVS/MILE
Idle Speed Neutral
ON/OFF
0-2000 RPM
-14 to +4 Degrees
-6% to +14%
2000-4000 RPM
-8 to +4 Degrees
4000-8000 RPM
-8 to +2 Degrees
Tire Size O/D 1788 MM To 3218 MM
OFF
450 - 1500
450 - 1500
High Fan 180 - 240
2/3 Shift -3 to +7 WOT Shift MPH 1/2 Shift -3 To + 7 3/4 Shift -3 to +7 4/5 Shift -3 to +7
2/3 Shift -/+ 25% WOT Shift Pressure 1/2 Shift -/+ 25% 3/4 Shift -/+ 25% 4/5 Shift -/+ 25%
Diagnose Vehicle Device Info Device Settings
Firm Ware Version 1.0
Tune Revision Software 2.0
Serial # XXXXXXXXX
Website
www.mrgasket.com
LCD Contrast 0-100
Back Light
ON/OFF
Check/Clear
Codes
Advanced Tunning
MAX Performance 93 Octane Performance 91 Octane Street 87 Octane
Program ECU
Program ECU