Mallory Ignition ACCEL POWER PROCESSOR 79100 - Manual (Page 3)

Power Processor
3
Introduction
Congratulations On the purchase of your new Accel/DFI Power Processor.
With over 20 years in designing and producing state of the art EFI & Ignition systems,
we are confident that this Power Processor will be a great addition to your vehicle.
It is designed with you, the end user, in mind to make it easy for you to use.
Clear Migration: It can support more than one vehicle. You can use it on your
friend’s vehicles to show them how it works. You can do that a total of 5 times.
On the fifth event, it has to be used in the primary vehicle it was purchased for.
Failure to do so will lock the VIN# of the 5
th vehicle and that will be the vehicle it
will stay with. (Do not attempt to program the computer in another vehicle
without first programming the original vehicle back to stock).
Continuous Updates: This Processor has built in self programming capabilities,
so it can be updated to the latest software available, VIA the internet. All you
need is a USB to USB2 Cable adapter and an internet connection. (For updating
info, go to
www.accel-dfi.com . Or call Tech Support: 248-380-2780
Multi-Use Technology: The Accel/DFI Power Processor covers both Gasoline &
Diesel applications.
How it works: The Processor uploads your OEM program, copies it and locks it VIA VIN #,
It then lets you make the program changes to a copy of the OEM program, when done; it
downloads the modified data back into the PCM.
The Power Processor offers the latest available technology for unparalleled high-
performance tuning.
Now you can optimize your engine’s and transmission’s tuning, as well as adjust
other vehicle parameters (see Processor Flow Chart), all at the touch of a button.
Your vehicle has an onboard computer (PCM) that controls the engine and
transmission functions. Inside your vehicle’s computer is a FLASH memory chip
which contains the vehicle’s programming. The Processor reprograms this chip,
according to your specifications. This is the only way an individual can reprogram
newer vehicles built in the United States.
To Start using your Power Processor, simply plug the cable into the vehicle’s
(ALDL) diagnostic connector located under the dash panel on the driver’s side (in
most cases). Set the parking brake. The Processor will prompt you to turn the
ignition key ON so it can check vehicle ID, but do not start the engine. It will then
identify your vehicle and display a series of vehicle options on its screen. It will
guide you through a number of programs and options for you to choose from.
When completed, it will instruct you to turn the key to OFF. Now you’re ready to
feel the additional power of the Accel/DFI Power Processor!