Magnum Venus Plastech HYDRAULIC MINI LINK - Manual (Page 17)

Mini Link Operations Manual
Rev. 08/2013 Page | 17
Description of Controls for Unit:
Familiarize yourself with the Air Manifold controls, which consist of the following
regulators and gauges:
 POWER ON/OFF CONTROL
– control box main power switch, turn On & Off
power to the control box and hydraulic pump / motor.

RECIRCULATION or GUN SELECT
– selects between the Recirculation and Gun
mode. In Recirculation mode the material is returned to the containers and in Gun
mode the material is ready to be dispensed through the gun.

RATE CONTROL DIAL – this is the pump speed control. It controls the rate at
which the material is dispensed.

START / STOP CONTROL – this starts or stops the pump movement. It turns Off
/ On the hydraulic motor / pump.

RATE DISPLAY – this displays a number used to indicate the rate of material
being dispensed. The display comes from MVP programmed to display a number
which can be used to represent a material flow rate. This display can also be
programmed to display the actual material flow rate in any unit desired or be
programmed as a total meter.
 DRIVE DISPLAY WINDOW
– shows the megahertz of the motor controller. The
window allows the operator to see the megahertz as displayed on the motor controller.
Drive Display Window Rate Display
Power On / Off Control
Mode Select Control
Rate Control Dial
Pump Start / Stop Control