Liquid Controls IT375 - Manual (Page 17)

Sponsler, Inc. Model IT375 Versions Pg. 17
6. VERSIONS
This table summarizes features of each of the different Model IT375 versions:
Model Number IT375i.X0L IT375i.X3L IT375i.X4L
Version Battery powered DC powered Loop powered
Power Lithium batteries
DC powered;
9-28Volts at
4mA maximum Loop powered;
9-28 Volts with
4-20mA out
Output None
Alarms - two open collector outputs
OR
Pulse output and low flow alarm
Supply Backup None Lithium batteries Lithium batteries
The standard unit is intrinsically safe (i), turbine mounted (4), battery powered (0) and linearized (L)
IT375i.40L
X denotes the mounting options, insert the corresponding number for the preferred option:
SR Strain relief cable entry
PM Panel mount
WM Wall mount (standard)
4 Turbine adaptor
EX Explosion proof
6.1 BATTERY POWERED VERSION
The battery powered version of the Model IT375 is designed for operation in the field without external power sources.
Lithium batteries provide sufficient power to operate the instrument for up to 5 years and the operator is warned of a low
power condition by a message on the LCD display.
New batteries can be purchased via Sponsler Company, Inc. or our distributors and replaced in the field without
compromising the IS approvals. There are two battery packs in each instrument and care must be taken to replace
only one pack at a time so that there is always power connected to the memory. Failure to do this may result in
loss of totals.