Lectrosonics VRFIELD (Narrowband) - Manual (Page 18)

VR Field
3.. Check only CD-ROM.drives then click “Next>” to
search the LecNet2 ™ CD for the USB driver.
4. When the driver is found, the LecNet2 ™ device
name will be displayed along with the location of
the driver. Click “ Next>” to install the driver. (The
device found will actually say “VR” instead of the
“DM1624” that appears in this example.)
5.. Click “Finish” when the installation is complete.
USB Driver Installation (Windows 2000) -
Subsequent Installations
Once the LecNet2 ™ USB driver is installed in a Win­
dows ® 2000 system device, and subsequent LectNet2
USB devices will invoke the Found.New.Hardware.
Wizard which will automatically load the LecNet2 ™ USB
driver for the new device.
1 LECTROSONICS, INC.