beautypg.com

Laurel Electronics LTSE6 - Manual User Manual

Page 7

background image

-

- 7 -

Blocking

, IS software will not be able to establish Ethernet communications. You will then need to

restore Windows Firewall defaults by clicking on

Control Panel

=>

Windows Firewall

=>

Advanced

=>

Restore Defaults

.

The Node Discovery tab under Node Setup will open once you have passed the Windows Firewall.
With a direct cable connection to the PC, only one Ethernet Node will be listed. With a LAN
connection, multiple Ethernet Nodes may be discovered on the same LAN. Select the Node which
is integral with your transmitter Device.