Aastra Telecom IP Phone - Manual (Page 112)

104 Model 57i IP Phone User Guide
Line Keys and Softkeys
Setting Callers List Key
Use the following procedure to configure a Callers List softkey on the 57i phone. The
following illustration shows the top softkeys on the 57i.
1. Click on Operation->Softkeys and XML.
or
Click on Operation->Expansion Module .
2. Click on the Bottom tab or the Top tab.
3. Select from "Key 1" through "Key 20" on the bottom tab.
or
Select from "Key 1" through "Key 10" on the top tab.
4. In the "Type" field, select Callers List.
5. In the "Label" field, enter a label to apply to this softkey.
6. If configuring a softkey on the Bottom Keys, in the state fields, check (enable) or
uncheck (disable) the states you want to apply to this softkey.
7. Click to save your changes.
Aastra Web UI
Note: By default, Key 3 on the top set of softkeys is configured for Callers
List.