Assembly of ww75-340, Assembly of ww75-340 -23, Maintenance – Alamo Eagle 20 User Manual

Page 173

MAINTENANCE

Eagle 20 03/09

Maintenance Section 5-23

MAINTENANCE

STEP 5

The Input Gear and Bearing can be removed from the Input Shaft by tapping the end of the Input Shaft on a
solid surface. FIGURE Mnt-R-0052.

The unit is now completely disassembled with exception of Oil Seals and Bearing Races that can be removed
by conventional means. FIGURE Mnt-R-0053.

Inspect and replace all worn or defective parts.

Assembly of WW75-340

STEP 1

Install the Bearing Race into the Hub cap.

STEP 2

Install the Bearing on the Output Shaft. FIGURE Mnt-R-0054. Place the Shaft into the Hub Cap. FIGURE
Mnt-R-0055. Place the Bearing FIGURE Mnt-R-0056 on the Shaft and carefully drive it down FIGURE Mnt-R-
0057. Replace any shims found in disassembly, Place the Gear FIGURE Mnt-R-0058 on the Shaft so that the
threads, for the Adjusting Nut, on Shaft are exposed.

This manual is related to the following products:

Eagle 14