Disassembly of divider gearbox, Disassembly of divider gearbox -21, Maintenance – Alamo Eagle 20 User Manual

Page 171

Text mode
Original mode

MAINTENANCE

Eagle 20 03/09

Maintenance Section 5-21

MAINTENANCE

Disassembly of Divider Gearbox

(Trained dealer personnel only)

STEP 1

Remove all eight of the M10 Bolts from both Cap Hubs, using a 14mm socket. FIGURE Mnt-R-0048. Remove
the Hub Assemblies and gaskets from the Main Housing. FIGURE Mnt-R-0048.

STEP 2

Remove the Hub Assembly from the vise and place it on a solid surface with the Gear in an upright position.
Using a Hammer, tap this Gear downward until the Adjusting Nuts fully exposed. Remove the Cotter Pin.
Remove the Adjusting Nut. FIGURE Mnt-R-0049.

This manual is related to the following products:

Eagle 14