Controlled Products Systems Group -108710 - Manual (Page 6)

1
3
4
5
6
7
8
9
16
17
18
5
4
2
11
12
13
14
16
15
10
14
17
11
11
1
22
22
4
3
5
1
1
FAAC S800H is an integrated hydraulic automated system, permitting vehicle access through swing leaf gates which, when in- when in-
stalled invisibly in the ground, does not alter the appearance of the gate. The model with a hydraulic lock device (CBAC) does not
require the installation of an electrical lock, as it guarantees the mechanical locking of the leaf when the motor is not operating. The
model without a hydraulic lock device always requires one or more electrical locks to ensure the leaf is mechanically locked. The
S800H automated systems were designed and built to automate swing leaf gates. Do not use for any other purpose.
Fig.1
1 Bleed screw
2 Support handle
3 Pinion
4 Securing screws
5 Screw for adjusting travel-limit
mechanical stops
6 Hydraulic release
7 Oil filling plug
8 Motor
9 Electronic encoder
10 Bearing case
11 Holes for securing the cover
12 Slots for securing the jack
13 Bearing bush
14 Wings for walling the
bearing case.
15 Hole for power cable or
drain pipe
16 Plastic adjustment wrench
and support bushing
17 Foundation box cover
18 Grooved bushing (p/n 390972)
Fig.2
1 S800H Operators with encoder
2 x AWG 14 (max 30’)
AWG 12 (max 50’)
AWG 10 (max 100’)
AWG 20 for encoder bus (Max. length 100’)
2 Photocells AWG 20 (Max. length 100’)
3 Control unit AWG 14 for AC power
4 Key operated push-button AWG 20
5 Warning Lamp 24 V AWG 16
115 v ~ / 60Hz
TECHNICAL
SPECIFICATIONS
CBAC
OPERATOR
SB
OPERATOR
Power supply (V dc) 24
Absorbed power (W) 60
Protection class IP 67
Type of oil FAAC HP OIL
Operating ambient temperature -4°F +131°F
Hydraulic lock Built in Not available
Max. torque (lbf.ft) 450
Angular speed (°/sec) 8.2
Duty cycle at 68 °F Continuous
Class of Operation Residential, Commercial
Max opening angle 113° (S800H 100°)
187° (S800H 180°)
Leaf max. length (ft) 13 16
Leaf max. weight (lb) 1760
Model S800H 24V Underground Hydraulic Swing Gate Operator
1. DESCRIPTION AND CHARACTERISTICS
1.1 TECHNICAL SPECIFICATIONS 1.2 ELECTRICAL LAYOUT
6 FAAC Model S800H Swing Gate Operator