CognitiveTPG Advantage DLX User Manual

Page 24

Loading Formats Using a USB Flash Drive

1. Create a folder on the USB flash drive at the root level named Cognitive.

2. Inside the Cognitive folder create a folder named Objects.

3. Place the desired Stored Label Formats or Menuing Program into the

Objects folder.

4. Turn the printer on and verify the POWER and READY lights are green.

5. Insert the USB flash drive into the USB A port on the back of the printer.

The

READY light will flash red during firmware installation.

6. When READY light remains solid green, turn the printer off and remove the

USB Flash Drive.

HELPFUL TIP:

THE PRINTER WILL LOAD THE OBJECTS FILES IN ALPHABETICAL ORDER. FOR

MORE INFORMATION ON CREATING STORED LABEL FORMATS OR MENUING PROGRAMS
PLEASE REFERENCE THE COGNITIVETPG CPL PROGRAMMERS GUIDE.