CognitiveTPG Advantage DLX User Manual

Page 18

Debug Report Level

Specifies the method by which the printer reports error.

Values:

• None = Turns error reporting Off.

• Serial = Printer sends error report to host device via serial port.

• Serial & Label = Printer sends error report via serial port and prints an

error label.

Auxiliary Power ON

Check Auxiliary Power ON to enable the 5V serial port output.

Enable Automatic Reprint

Checking the Enable Automatic Reprint box prompts the printer to reprint a
label in the event the printer detects an index mark prior to completing the
requested label.

Media Adjust

Adjust the sharpness of the leading edge of printed text or rotated barcodes.
Media Adjust range = 0 to 3.

Pitch

The pitch represents the dots per inch (dpi) setting for the printer.

Values:

• 100 or 200 for 200 dpi printers

• 150 or 300 for 300 dpi printers

Darkness

The

Darkness value adjusts the print darkness.

Darkness ran ge: -200 to 800

NOTE: THE FACTORY DEFAULT FOR DARKNESS IS 0.