CognitiveTPG Advantage DLX User Manual

Page 19

Primary Language

Selects the primary command language the printer uses. The Advantage DLX
uses Cognitive Printer Language (CPL) as the default command language.
Select between CPL, EcPL, and ZcPL command languages.

NOTE: THE ADVANTAGE DLX CURRENTLY DOES NOT SUPPORT TPCL COMMAND
LANGUAGE.

Thermal Mode

Select Direct Thermal or Thermal Transfer based on the model of Advantage
DLX printer and the type of media being used.

IMPORTANT!

THERMAL TRANSFER MODE REQUIRES THE USE OF A THERMAL

TRANSFER PRINTER AND A PRINT RIBBON. DIRECT THERMAL MODE REQUIRES THE
USE OF DIRECT THERMAL MEDIA.

Label Positioning

Print Width

The

Print Width value adjusts the maximum

printing width of the printer.

Range:

• 0.15 to 2.4 inches for 2 inch model

printers

• 0.15 to 4.2 inches for 4 inch model

printers

Auto Recalibration

Check and Apply

Enable Auto Recalibration and the printer will

automatically attempt to recalibrate in the event an index mark is not detected.

Auto Top Of Form

Check and Apply

Enable Automatic TOF and the printer will feed a label

when the printer is turned ON or the printhead is latched.

Indexing

Indexing indicates to the printer the index type of the media being used. The
Indexing On check box must be checked when using Bar, Gap, or Notch style
indexing. Uncheck the

Indexing On box when using continuous media.