CognitiveTPG A799 User Manual
Page 84

Chapter 4: Programming Commands
84
Revision D 12/09
A799-PG00001D
Transmit printer ID
ASCII
GS I n
Hexadecimal 1D 49 n
Decimal
29 73 n
Value of n:
1, 49 = Printer model ID
2, 50 = Type ID
3, 51 = ROM version ID
4, 52 = Logo Definition
Transmits the printer ID specified by n as follows:
n
Printer ID
Specification
ID (Hexadecimal)
1, 49 Printer model ID A799
0x24
2, 50 Type ID
Installed options Refer to below
3, 51 ROM version ID
ROM version
0x00
4, 52 Logo definition
Logo definition
Refer to next
column
n = 2 or 50: Type ID
Bit Off/On
Hex
Decimal Function
0
Off
00
0
No two-byte character code installed.
On
01
1
Two-byte character code installed.
1
Off
00
0
No knife installed.
On
02
2
Knife installed.
2
–
–
–
Undefined.
3
–
–
–
Undefined.
4
Off
00
0
Not used. Fixed to Off.
5
–
–
–
Undefined
6
–
–
–
Undefined
7
Off
00
0
Not used. Fixed to Off.
n = 4 or 52: Logo Definition
Bit Off/On
Hex Decimal Function
0
Off
00
0
No logo downloaded (SRAM or Flash)
On
01
1
Logo downloaded (SRAM or Flash)
1–7 Off
00
0
Not Used. Fixed to Off.
Transmits the printer ID specified by n. This command is a batch mode command; that is, the response is transmitted
after all prior data in the receive buffer has been processed. There may be a time lag between the printer receiving this
command and transmitting the response, depending on the receive buffer status.